• SAE AMS4613

SAE AMS4613

  • Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked (8%) and Precipitati
  • standard by SAE International, 07/08/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate.

These products have been used typically for parts requiring high strength up to 500 øF (260 øC), but usage is not limited to such applications. Material may be welded in the specified condition but properties are improved by reheat treatment after welding. Reheat treatment after welding, however, may reduce resistance to stress-corrosion cracking. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J119_201005

SAE J119_201005

Fiberboard Crease Bending Test..

$41.00 $81.00

SAE J1810_201005

SAE J1810_201005

Electrical Indicating System Specification..

$41.00 $81.00

SAE J371_201005

SAE J371_201005

Drain, Fill, and Level Plugs for Off-Road, Self-Propelled Work Machines..

$41.00 $81.00

SAE AS1032F

SAE AS1032F

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON RUN, FLARED..

$41.00 $81.00