• SAE AMS4777H

SAE AMS4777H

  • Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 ¿¿F (971 to 999 ¿¿C) Solidus-Liquidus Range
  • standard by SAE International, 10/28/2010
  • Category: SAE

$81.00 $41.00

This specification covers a nickel alloy in the form of wire, rod, strip, foil, and powder and a viscous mixture (paste) of the powder in a suitable binder.

This filler metal has been used typically for joining nonferrous alloys and corrosion and heat resistant steels and alloys where low flow point and corrosion and oxidation resistant joints with good strength at elevated temperatures are required, but usage is not limited to such applications. Also may be used as a corrosion and oxidation resistant hard coating.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1926/3_201003

SAE J1926/3_201003

Connections for General Use and Fluid Power—Ports and Stud Ends with ASME B1.1 Threads and O-Ring ..

$41.00 $81.00

SAE J1926/2_201003

SAE J1926/2_201003

Connections for General Use and Fluid Power—Ports and Stud Ends with ASME B1.1 Threads and O-Ring ..

$41.00 $81.00

SAE J941_201003

SAE J941_201003

Motor Vehicle Drivers¿¿¿ Eye Locations..

$41.00 $81.00

SAE J2601_201003

SAE J2601_201003

Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles..

$41.00 $81.00