• SAE AMS4909J

SAE AMS4909J

  • Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed
  • standard by SAE International, 08/16/2012
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of sheet, strip, and plate.

These products have been used typically for parts requiring a combination of weldability, ductility, and good notch-toughness down to -423 \mDF (-253 \mDC), but usage is not limited to such applications. Certain processing procedures and service conditions may cause those products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4785J

SAE AMS4785J

Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 ..

$41.00 $81.00

SAE AMS4786J

SAE AMS4786J

Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915..

$41.00 $81.00

SAE AMS4788B

SAE AMS4788B

Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 ¿¿F (660 to 707 ¿¿C) Solid..

$41.00 $81.00

SAE AMS5679H

SAE AMS5679H

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe..

$41.00 $81.00