• SAE AMS4910P

SAE AMS4910P

  • Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed
  • standard by SAE International, 09/20/2012
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of sheet, strip, and plate.

These products have been used typically for parts requiring strength up to 800 \mDF (427 \mDC) and where such parts may require welding during fabrication, but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6312H

SAE AMS6312H

Steel Bars, Forgings, and Tubing, 1.8Ni - 0.25Mo (038 - 0.43C) (SAE 4640)..

$41.00 $81.00

SAE AMS6350L

SAE AMS6350L

Steel Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28-0.33C) (SAE 4130)..

$41.00 $81.00

SAE AMS6351H

SAE AMS6351H

Steel, Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28 0.33C) (SAE 4130) Spheroidized..

$41.00 $81.00

SAE AMS6356G

SAE AMS6356G

Steel, Sheet, Strip, and Plate, 0.95Cr - 0.20Mo - (0.30 - 0.35C) (4132)..

$41.00 $81.00