• SAE AMS4915L

SAE AMS4915L

  • Titanium Alloy Sheet, Strip, and Plate 8Al - 1V - 1Mo Single Annealed
  • standard by SAE International, 02/26/2013
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of sheet, strip, and plate up through 4.000 inches (101.60 mm).

These products have been used typically for parts requiring strength up to 800 \mDF (427 \mDC) where fracture toughness is not critical.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4334B

SAE AMS4334B

Aluminum Alloy, Forgings 7.8Zn - 2.2Mg - 1.6Cu - 0.15Cr (7249-T74 and -T7452) (Stabilized: Apr 2017)..

$41.00 $81.00

SAE AS34641A

SAE AS34641A

CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS L..

$41.00 $81.00

SAE AMS4922C

SAE AMS4922C

Titanium Alloy, Seamless, Hydraulic Tubing 15V - 3.0Cr - 3.0Al - 3.0Sn Cold Worked and Precipitation..

$41.00 $81.00

SAE AMS5917

SAE AMS5917

Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solutioned and Aged..

$41.00 $81.00