• SAE AMS4917G

SAE AMS4917G

  • Titanium Alloy Sheet, Strip, and Plate 13.5V 11Cr 3.0Al Solution Heat Treated
  • standard by SAE International, 03/01/2008
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of sheet, strip, and plate.

This material has been used typically for parts to be formed in the solution heat treated condition and subsequently precipitation heat treated, requiring high strength-to-weight ratio and stability up to 550 \mDF (288 \mDC) in the precipitation heat treated conditions, but usage is not limited to such applications.

This alloy may have poor crack propagation resistance in the precipitation heat treated condition.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4150N

SAE AMS4150N

Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Preci..

$41.00 $81.00

SAE AMS4431

SAE AMS4431

Magnesium Alloy, Direct Chill Strand Cast, 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6), Solution and ..

$41.00 $81.00

SAE AS6135A

SAE AS6135A

Interface Standard, Airborne EO/IR Systems, Data..

$41.00 $81.00

SAE AMS2470P

SAE AMS2470P

Anodic Treatment of Aluminum Alloys Chromic Acid Process..

$41.00 $81.00