• SAE AMS4917H

SAE AMS4917H

  • Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated
  • standard by SAE International, 10/19/2012
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of sheet, strip, and plate through 4.00 inches (101.6 mm)..

This material has been used typically for parts to be formed in the solution heat treated condition and subsequently precipitation heat treated, requiring high strength-to-weight ratio and stability up to 550 \mDF (288 \mDC) in the precipitation heat treated conditions, but usage is not limited to such applications.

This alloy may have poor crack propagation resistance in the precipitation heat treated condition.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2732_200806

SAE J2732_200806

Motor Vehicle Seat Dimensions..

$41.00 $81.00

SAE J2000_200806

SAE J2000_200806

Internal Combustion Engines--Piston Rings--Keystone Rings..

$41.00 $81.00

SAE J2001_200806

SAE J2001_200806

Internal Combustion Engines--Piston Rings--Half Keystone Rings..

$41.00 $81.00

SAE J2002_200806

SAE J2002_200806

Internal Combustion Engines--Piston Rings--Oil Control Rings..

$41.00 $81.00