• SAE AMS4919G

SAE AMS4919G

  • Titanium Alloy Sheet, Strip, and Plate, 6Al - 2Sn - 4Zr - 2Mo - 0.08Si, Duplex Annealed
  • standard by SAE International, 04/19/2010
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of sheet, strip, and plate.

These products have been used typically for parts requiring a combination of high strength and toughness and good creep resistance up to 1000 \mDF (538 \mDC), but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4827E

SAE AMS4827E

Bearings, Leaded Bronze 80Cu - 10Pb - 10Sn Steel Back..

$41.00 $81.00

SAE AMS4842E

SAE AMS4842E

Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As Cast..

$41.00 $81.00

SAE AMS4270B

SAE AMS4270B

Aluminum Alloy, Alclad Flat Sheet 4.1Cu - 1.4Mg - 0.45Mn (Alclad 2424-T3) Solution Heat Treated and ..

$41.00 $81.00

SAE AMS4296B

SAE AMS4296B

Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated..

$41.00 $81.00