• SAE AMS4937C

SAE AMS4937C

  • Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 6V - 2Sn, Beta Extruded Plus Annealed, Heat Treatable
  • standard by SAE International, 10/18/2010
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.

These products have been used typically for parts requiring high strength up to 750 \mDF (399 \mDC), particularly those parts machined and/or flash- butt welded in the annealed condition with the option of subsequent solution and precipitation heat treatment, but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2222K

SAE AMS2222K

Tolerances Copper and Copper Alloy Sheet, Strip, and Plate..

$41.00 $81.00

SAE AMS2420E

SAE AMS2420E

Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process..

$41.00 $81.00

SAE AMS3216H

SAE AMS3216H

Elastomer: Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80..

$41.00 $81.00

SAE AMS4193D

SAE AMS4193D

Aluminum Alloy Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked..

$41.00 $81.00