• SAE AMS4958D

SAE AMS4958D

  • Titanium Alloy Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground
  • standard by SAE International, 06/10/2013
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of bars and rod 1.000 inch (25.40 mm) and under in nominal diameter.

These products have been used typically for coil springs requiring low solid height, high tensile strength, and corrosion resistance, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AIR5914

SAE AIR5914

Landing Gear Fatigue Spectrum Development For Part 25 Aircraft..

$41.00 $81.00

SAE J1979DA_201406

SAE J1979DA_201406

J1979-DA, Digital Annex of E/E Diagnostic Test Modes..

$41.00 $81.00

SAE AMS5743J

SAE AMS5743J

Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat ..

$41.00 $81.00

SAE AMS5745F

SAE AMS5745F

Steel, Corrosion and Heat-Resistant, Bars and Forgings 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Equalized and ..

$41.00 $81.00