• SAE AMS4971H

SAE AMS4971H

  • Titanium Alloy, Bars, Wire, Forgings, and Rings 6A1 6V 2Sn Annealed, Heat Treatable
  • standard by SAE International, 11/20/2007
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, and stock for forging or flash welded rings.

These products have been typically used for parts to be machined in the annealed condition and requiring high strength ratio up to 750 \mDF (399 \mDC) after solution and precipitation heat treatment, but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5892B

SAE AMS5892B

Alloy, Sheet and Strip 42Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.6Ti Solution Heat Treated, Precipitatio..

$41.00 $81.00

SAE AMS5225F

SAE AMS5225F

Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 50..

$41.00 $81.00

SAE AMS5771F

SAE AMS5771F

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 74Ni - 7.0Cr - 16.5 Mo Solutio..

$41.00 $81.00

SAE AMS5876D

SAE AMS5876D

Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction..

$41.00 $81.00