• SAE AMS4972F

SAE AMS4972F

  • Titanium Alloy, Bars, Wire, and Rings 8A1 1Mo 1V Solution Heat Treated and Stabilized
  • standard by SAE International, 10/01/2007
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of bars, wire, flash welded rings, and stock or flash welded rings or heading.

This alloy has been used typically for parts requiring strength up to 800 \mDF (427 \mDC), but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3793C

SAE AMS3793C

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus..

$41.00 $81.00

SAE AS1009K

SAE AS1009K

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS..

$41.00 $81.00

SAE AS13004

SAE AS13004

Process Failure Mode and Effects Analysis (PFMEA) and Control Plans..

$41.00 $81.00

SAE AIR825/8

SAE AIR825/8

Continuous Flow Oxygen Systems..

$41.00 $81.00