• SAE AMS4987D

SAE AMS4987D

  • Titanium Alloy, Forgings, 10V - 2Fe - 3AI, Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged, 140 ksi
  • standard by SAE International, 05/26/2011
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of forgings under 4.0 inches (102 mm) in nominal cross-sectional thickness and of forging stock.

These forgings have been used typically for parts in high stress and stress-corrosion-resistant applications requiring higher fracture toughness and allowing lower tensile properties than AMS 4984 and AMS 4986, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1772_201710

SAE J1772_201710

SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler..

$41.00 $81.00

SAE J1939/5_201710

SAE J1939/5_201710

Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide..

$41.00 $81.00

SAE AIR4985

SAE AIR4985

A Methodology for Quantifying the Performance of an Engine Monitoring System..

$41.00 $81.00

SAE AMS4468

SAE AMS4468

Aluminum Alloy, Plate 5.0Cu - 0.4Mn - 0.5Mg - 0.4Ag (2139-T84) Solution Heat Treated, Cold Worked, a..

$41.00 $81.00