• SAE AMS4993E

SAE AMS4993E

  • Titanium Alloy, Blended Powder Compacts, Sintered 6Al - 4V
  • standard by SAE International, 10/24/2013
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of compacts produced by pressing and sintering a blend of elemental titanium powder and aluminum vanadium alloy powder. These compacts have been used typically for light weight nuts ("B-nuts") used for connecting fluid lines to fittings and to equipment, and for other small high-quantity miscellaneous hardware, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5889C

SAE AMS5889C

Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Con..

$41.00 $81.00

SAE AMS6300G

SAE AMS6300G

Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037)..

$41.00 $81.00

SAE AMS4004E

SAE AMS4004E

Aluminum Alloy, Foil 2.5Mg - 0.25Cr (5052-H191) Strain Hardened (Stabilized: Dec 2015)..

$41.00 $81.00

SAE AMS4761B

SAE AMS4761B

Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to 1330 ¿¿F (649 to 721 ¿¿C) Soli..

$41.00 $81.00