• SAE AMS5355J

SAE AMS5355J

  • Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homoge
  • standard by SAE International, 10/08/2015
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of investment castings.

These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 \mDF (316 \mDC), but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 \mDF (538 \mDC).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE MA3394A

SAE MA3394A

CLIP - SPRING, TENSION, INNER 6.7 MM BOLT HOLE, AMS 5525, METRIC (Stabilized: Jul 2015)..

$41.00 $81.00

SAE MA3428A

SAE MA3428A

NUT, CASTELLATED, HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC (Stabilized: Jul 2015)..

$41.00 $81.00

SAE MA3393A

SAE MA3393A

CLIP - SPRING, TENSION, OUTER 6.7 MM BOLT HOLE, AMS 5525, METRIC (Stabilized: Jul 2015)..

$41.00 $81.00

SAE J2779_201507

SAE J2779_201507

Low Speed Thorax Impact Test Procedure for the HIII 50th Male Dummy..

$41.00 $81.00