• SAE AMS5604F

SAE AMS5604F

  • Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr 4.0Ni 4.0Cu 0.30Cb, Solution Heat Treated, Precipitation Hardenable
  • standard by SAE International, 07/22/2011
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.

These products have been used typically for parts requiring corrosion resistance and high strength up to 600 \mDF (316 \mDC) and where such parts may require welding during fabrication, but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2451/1A

SAE AMS2451/1A

Plating, Brush, Nickel General Purpose..

$41.00 $81.00

SAE AMS2451/3A

SAE AMS2451/3A

Plating, Brush, Nickel Low Stress, Low-Hardness Deposit..

$41.00 $81.00

SAE AMS2451/5A

SAE AMS2451/5A

Plating, Brush, Chromium Hard Deposit, Trivalent..

$41.00 $81.00

SAE AMS2451/6A

SAE AMS2451/6A

Plating, Brush, Copper General Purpose..

$41.00 $81.00