• SAE AMS5611F

SAE AMS5611F

  • Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Consumable Electrode Melte
  • standard by SAE International, 08/12/2013
  • Category: SAE

$81.00 $41.00

This specification covers a premium aircraft-quality, corrosion and heat resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.

These products have been used typically for pressure vessels or structural parts requiring uniformly high room-temperature tensile properties with oxidation resistance up to 1000 \mDF (538 \mDC), where control of ferrite is necessary, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4147D

SAE AMS4147D

Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Re..

$41.00 $81.00

SAE AMS4163E

SAE AMS4163E

Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treat..

$41.00 $81.00

SAE AMS4229F

SAE AMS4229F

Aluminum Alloy Castings, High Strength, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Soluti..

$41.00 $81.00

SAE AS5179B

SAE AS5179B

NUT, FITTING, PORT..

$41.00 $81.00