• SAE AMS5620G

SAE AMS5620G

  • Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 13Cr (0.30 - 0.40C) (SAE 51420F, 51420FSe) Free-Machining Grade
  • standard by SAE International, 04/11/2012
  • Category: SAE

$81.00 $41.00

This specification covers two types of corrosion and moderate heat resistant steel in the form of bars, wire, forgings, and forging stock.

These products have been used typically for parts on which the amount of machining warrants use of free-machining grade of steel and requiring hardness within the range of 40 to 50 HRC with corrosion resistance and oxidation resistance up to 1000 \mDF (538 \mDC), but useful at the higher temperatures only when stresses are moderately low, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking. ARP1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J306_201902

SAE J306_201902

Automotive Gear Lubricant Viscosity Classification..

$41.00 $81.00

SAE AMS5382K

SAE AMS5382K

Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W As-Cas..

$41.00 $81.00

SAE AMS5592G

SAE AMS5592G

Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15..

$41.00 $81.00

SAE EIA649C

SAE EIA649C

Configuration Management Standard..

$74.00 $147.00