• SAE AMS5643R

SAE AMS5643R

  • Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr 4.0Ni 0.30Cb 4.0Cu Solution Heat Treated, Precipitation
  • standard by SAE International, 02/01/2008
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging, flash welded rings, or heading.

These products have been used typically for parts requiring corrosion resistance and high strength up to 600 \mDF (316 \mDC), but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.

For applications, such as bolting, where stress-corrosion is a possibility, the product should be precipitation heat treated for not less than 4 hours at the highest temperature compatible with the strength requirements but in no case lower than 1025 \mDF (552 \mDC).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS54

SAE AS54

TACHOMETER DRIVE ¿¿¿ TYPE I..

$41.00 $81.00

SAE AS9359A

SAE AS9359A

NUT, CASTELLATED, HEXAGON, SILVER PLATED, CRES UNS S66286, 130 KSI MIN..

$41.00 $81.00

SAE AS9201C

SAE AS9201C

NUT, PLAIN, HEXAGON, BOSS CONNECTION, SILVER PLATED, 347 CRES UNS S34700..

$41.00 $81.00

SAE J815_201211

SAE J815_201211

Load Deflection Testing of Urethane Foams for Automotive Seating..

$41.00 $81.00