• SAE AMS5652H

SAE AMS5652H

  • Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni - 2.0Si (SAE 30314) Solution Heat Treat
  • standard by SAE International, 05/17/2010
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion and heat resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.

These products have been used typically for parts requiring good corrosion resistance and which will be subjected to elevated temperatures during fabrication or in service and for parts requiring oxidation resistance up to 2000 \mDF (1093 \mDC) but useful at the higher temperatures only when stresses are low, but usage is not limited to such applications.

Strength at elevated temperatures is similar to that of the 18-8 type of steels. The specified silicon content improves oxidation resistance with some sacrifice of weldability and ductility.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS81550A

SAE AS81550A

Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone..

$41.00 $81.00

SAE AIR851C

SAE AIR851C

O-Ring Tension Testing Calculations (Stabilized: May 2014)..

$41.00 $81.00

SAE J1512_201405

SAE J1512_201405

Manual Slack Adjuster Performance Requirements (Stabilized: May 2014)..

$41.00 $81.00

SAE J1702_201405

SAE J1702_201405

Self-Propelled Sweepers Sweep-Ability Performance..

$41.00 $81.00