• SAE AMS5659M

SAE AMS5659M

  • Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr 4.5Ni 0.30Cb (Nb) 3.5Cu Consumable Electrode Melted
  • standard by SAE International, 12/17/2008
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, extrusions, and stock for forging, flash welded rings, or extruding.

These products have been used typically for parts requiring corrosion resistance and high strength up to 600 \mDF (316 \mDC) with good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1889_201106

SAE J1889_201106

L.E.D. Signal and Marking Lighting Devices..

$41.00 $81.00

SAE J573_201106

SAE J573_201106

Signal & Marking Light Sources..

$41.00 $81.00

SAE J1752/2_201106

SAE J1752/2_201106

Measurement of Radiated Emissions from Integrated Circuits—Surface Scan Method (Loop Probe Method)..

$41.00 $81.00

SAE AIR5277A

SAE AIR5277A

Aerospace Fluid Power - Waste Reduction Practices for Used Phosphate Ester Aviation Hydraulic Fluid..

$41.00 $81.00