• SAE AMS5661F

SAE AMS5661F

  • Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consu
  • standard by SAE International, 02/09/2012
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion and heat resistant nickel-iron alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

These products have been used typically for parts, such as turbine discs, shafts, and blades, requiring high strength than AMS 5660 up to 1400 degrees F (760 degrees C) and oxidation resistance up to 1600 degrees F (871 degrees C), but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS1010H

SAE AS1010H

FITTING, ELBOW, 45 DEGREE, STANDARD AND REDUCER, BULKHEAD, FLARELESS..

$41.00 $81.00

SAE AS4663C

SAE AS4663C

FITTING, UNION, SHORT FLARELESS..

$41.00 $81.00

SAE AS4666C

SAE AS4666C

FITTING, ELBOW, 45¿¿, BULKHEAD, SHORT FLARELESS..

$41.00 $81.00

SAE AS4667B

SAE AS4667B

ELBOW ASSEMBLY, 45¿¿, RETAINED NUT, SHORT FLARELESS..

$41.00 $81.00