• SAE AMS5665N

SAE AMS5665N

  • Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 74Ni - 15.5Cr - 8.0Fe
  • standard by SAE International, 10/26/2012
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

These products have been used typically for parts requiring both corrosion and oxidation resistance and where such parts may require welding during fabrication and for parts requiring oxidation resistance up to 2000 degrees F (1093 degrees C) but useful at the higher temperatures only when stresses are low, but usage is not limited to such applications. Strength at elevated temperatures is similar to that of the 18-8 type of steel.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J384_201410

SAE J384_201410

Motor Vehicle Seat Belt Anchorages - Test Procedure..

$41.00 $81.00

SAE AMS4900P

SAE AMS4900P

Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength..

$41.00 $81.00

SAE AS1366A

SAE AS1366A

ELBOW, 90¿¿, FLARED TUBE BULKHEAD UNIVERSAL, FOR SEAL RING..

$41.00 $81.00

SAE AS1367A

SAE AS1367A

CROSS, FLARED TUBE FOR SEAL RING..

$41.00 $81.00