• SAE AMS5702D

SAE AMS5702D

  • Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Elect
  • standard by SAE International, 04/12/2012
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. These products have been used typically for parts requiring a combination of resistance to creep and stress-rupture up to 1300 \mDF (704 \mDC), oxidation resistance up to 1800 \mDF (982 \mDC), and good machinability, particularly parts which are welded and then precipitation heat treated to develop required properties, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2613_201710

SAE J2613_201710

Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Dou..

$41.00 $81.00

SAE AMS2804D

SAE AMS2804D

Identification Castings..

$41.00 $81.00

SAE AMS4296C

SAE AMS4296C

Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated..

$41.00 $81.00

SAE AMS4463A

SAE AMS4463A

Aluminum Alloy, Plate (7255-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.12Zr Solution Heat Treated, Stress Reli..

$41.00 $81.00