• SAE AMS5763D

SAE AMS5763D

  • Steel, Corrosion Resistant Bars, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.50Cb (Nb) - 1.5Cu Solution Heat Treated
  • standard by SAE International, 06/16/2010
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.

These products have been used typically for parts requiring corrosion resistance approximating that of steels of the 18-8 types and high strength exceeding that of the 12 Cr martensitic types up to 700 \mDF (370 \mDC), but usage is not limited to such applications.

This steel can be used in the solution heat treated condition and is capable of being precipitation heat treated to tensile strengths as high as 180,000 psi (1240 MPa).

Although this steel is relatively immune to stress-corrosion cracking, reference should be made to ARP 1110 for recommended practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2792_201509

SAE J2792_201509

Test Methodology for Evaluating the Chemical Compatibility of Wheel Finishes with Various Chemicals ..

$41.00 $81.00

SAE J968/1_201509

SAE J968/1_201509

Diesel Injection Pump Testing - Part 1: Calibrating Nozzle and Holder Assemblies..

$41.00 $81.00

SAE J968/2_201509

SAE J968/2_201509

Diesel Injection Pump Testing¿¿¿Part 2: Orifice Plate Flow Measurement..

$41.00 $81.00

SAE J1549_201509

SAE J1549_201509

Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies..

$41.00 $81.00