• SAE AMS5790D

SAE AMS5790D

  • Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb High Ferrite Grade
  • standard by SAE International, 02/27/2014
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been used typically as bare wire filler metal for gas-tungsten-arc or gas-metal-arc welding of corrosion and heat resistant alloys of similar composition, but usage is not limited to such applications.The relatively high ferrite content promotes weldability by combating microfissuring and minimizing cracking in heavy sections but limits use of the wire to applications not operating in the sigma-forming temperature range, approximately 1100 to 1600 degrees F (590 to 870 degrees C).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS6285B

SAE AS6285B

Aircraft Ground Deicing/Anti-Icing Processes..

$41.00 $81.00

SAE J180_201905

SAE J180_201905

Electrical Charging Systems for Off-Road Work Machines..

$41.00 $81.00

SAE J2295M_201905

SAE J2295M_201905

Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)..

$41.00 $81.00

SAE J283_201905

SAE J283_201905

Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Po..

$41.00 $81.00