• SAE AMS5860F

SAE AMS5860F

  • Steel, Corrosion-Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple Melted, Solution Heat Treated
  • standard by SAE International, 04/13/2012
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion and moderate heat resistant steel in the form of sheet, strip, and plate.

These products have been used typically for parts requiring corrosion resistance and high strength in service up to 800 \mDF (427 \mDC). The steel can be precipitation hardened to minimum tensile strengths up to 225,000 psi (1551 MPa). Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment. ARP 1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4467A

SAE AMS4467A

Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu 1.5Mg 0.60Mn (Alclad 2024, -T861 Sheet & Plate) Soluti..

$41.00 $81.00

SAE AMS4510H

SAE AMS4510H

Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu - 4.0Sn - 0.19P Spring Temper (H08)..

$41.00 $81.00

SAE AMS4926N

SAE AMS4926N

Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength..

$41.00 $81.00

SAE AMS4972H

SAE AMS4972H

Titanium Alloy Bars, Wire, and Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized..

$41.00 $81.00