• SAE AMS5875C

SAE AMS5875C

  • Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged
  • standard by SAE International, 12/11/2012
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion and heat resistant cobalt alloy in the form of strip 0.100 inch (2.54 mm) and under in specified thickness and 4.000 inches (101.60 mm) and under in specified width. This strip has been used typically for springs requiring a combination of high strength up to 800 degrees F (425 degrees C), excellent corrosion resistance, and good fatigue properties, but usage is not limited to such applications. Alloy is nonmagnetic.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4236D

SAE AMS4236D

Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Natur..

$41.00 $81.00

SAE AS35769A

SAE AS35769A

GASKET, METALLIC, ENCASED, ANNULAR, COPPER..

$41.00 $81.00

SAE AMS4460A

SAE AMS4460A

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 24 Brazing Sheet) As Fabricated..

$41.00 $81.00

SAE J1939/82_201506

SAE J1939/82_201506

Compliance..

$41.00 $81.00