• SAE AMS5902C

SAE AMS5902C

  • Steel, Corrosion-Resistant, Sheet and Strip 18Cr ¿¿¿ 8Ni (SAE 30301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
  • standard by SAE International, 06/10/2014
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of sheet and strip.

These products have been used typically in fabrication of aircraft structural components requiring moderate forming and bending, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties of corrosion resistance before, during, or after fabrication.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1334_201509

SAE J1334_201509

Hydraulic Cylinder Integrity Test..

$41.00 $81.00

SAE J1235_201509

SAE J1235_201509

Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve..

$41.00 $81.00

SAE J1236_201509

SAE J1236_201509

Cast Iron Sealing Rings (Metric) (Stabilized: Sep 2015)..

$41.00 $81.00

SAE J2087_201509

SAE J2087_201509

Daytime Running Light..

$41.00 $81.00