• SAE AMS5905B

SAE AMS5905B

  • Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
  • standard by SAE International, 04/16/2012
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of sheet and strip.

These products have been used typically in aircraft structural components requiring moderate forming and bending during fabrication and where corrosion resistant up to 800 \mDF (427 \mDC) is required, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked production should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1194_201611

SAE J1194_201611

Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors (Stabilized: Nov 2016)..

$41.00 $81.00

SAE J492_201611

SAE J492_201611

Guide for Rivet Selection and Design Consideration (Stabilized: Nov 2016)..

$41.00 $81.00

SAE J892_201611

SAE J892_201611

Push-On Spring Nuts Inch Series - General Specifications (Stabilized: Nov 2016)..

$41.00 $81.00

SAE AIR4069C

SAE AIR4069C

Sealing of Integral Fuel Tanks..

$41.00 $81.00