SAE AMS5906B
- Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength
- standard by SAE International, 04/16/2012
- Category: SAE
$81.00
$41.00
This specification covers a corrosion-resistant steel in the form of sheet and strip.
These products have been used typically in aircraft structural components requiring forming and bending during fabrication and where corrosion resistance up to 800 \mDF (427 \mDC) is required but usage is not limited to such applications.
Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
These products have been used typically in aircraft structural components requiring forming and bending during fabrication and where corrosion resistance up to 800 \mDF (427 \mDC) is required but usage is not limited to such applications.
Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
