• SAE AMS5907B

SAE AMS5907B

  • Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (SAE 30316) Cold Rolled, 1/4 Hard, 125 ksi (862
  • standard by SAE International, 04/16/2012
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion and heat resistant steel in the form of sheet, strip, and plate.

These products have been used typically in aircraft structural components requiring moderate forming and bending during fabrication and where corrosion and heat resistance up to 1600 \mDF (871 \mDC) is required, but usage is not limited to such applications. At elevated temperatures, strength of this steel is slightly higher than, and oxidation resistance is similar to, that of the 18-8 type steels.

Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties of corrosion resistance before, during, or after fabrication.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1526_201509

SAE J1526_201509

SAE Fuel Consumption Test Procedure (Engineering Method)..

$41.00 $81.00

SAE J551/15_201509

SAE J551/15_201509

Vehicle Electromagnetic Immunity - Electrostatic Discharge (ESD)..

$41.00 $81.00

SAE GEIAHB0005_3

SAE GEIAHB0005_3

Rework/Repair Handbook to Address the Implications of Lead-Free Electronics and Mixed Assemblies in ..

$41.00 $81.00

SAE AMS4077H

SAE AMS4077H

Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-O) Anneal..

$41.00 $81.00