• SAE AMS5911B

SAE AMS5911B

  • Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
  • standard by SAE International, 06/10/2014
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of sheet and strip.

These products have been used typically for applications requiring moderate forming and bending, but usage is not limited to such applications.

Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion-resistance before, during, or after fabrication.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3371A

SAE AMS3371A

Silicone Resin, Elastomeric, Opaque, Room Temperature Cure..

$41.00 $81.00

SAE AIR4827A

SAE AIR4827A

Modeling Techniques for Jet Engine Test Cell Aerodynamics..

$41.00 $81.00

SAE J2030_200906

SAE J2030_200906

Heavy-Duty Electrical Connector Performance Standard..

$41.00 $81.00

SAE J2806_200906

SAE J2806_200906

Off-Vehicle Brake Testing for Service Brakes Over 10 000 lb GVW¿¿¿Air, Hydraulic, and Mechanical Act..

$41.00 $81.00