• SAE AMS5912B

SAE AMS5912B

  • Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
  • standard by SAE International, 06/10/2014
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of sheet and strip.

These products have been used typically for applications requiring moderate forming and bending, but usage is not limited to such applications.

Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion-resistance before, during, or after fabrication.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE JA1012_201108

SAE JA1012_201108

A Guide to the Reliability-Centered Maintenance (RCM) Standard..

$41.00 $81.00

SAE J1787_201108

SAE J1787_201108

Measurement of the Total Ash Content of Aviation Piston Engine Oils by a Calculation Method..

$41.00 $81.00

SAE AIR1269C

SAE AIR1269C

Molded Rigid Plastic Parts (Stabilized: Aug 2011)..

$41.00 $81.00

SAE AMS4335

SAE AMS4335

Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Te..

$41.00 $81.00