• SAE AMS5913B

SAE AMS5913B

  • Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength
  • standard by SAE International, 06/10/2014
  • Category: SAE

$81.00 $41.00

This specification covers a corrosion-resistant steel in the form of sheet and strip.

These products have been used typically for applications requiring moderate drawing and forming, but usage is not limited to such applications.

Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion-resistance before, during, or after fabrication.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5061H

SAE AMS5061H

Steel, Low Carbon Bars, and Wire 0.08 - 0.20 (Stabilized: Aug 2017)..

$41.00 $81.00

SAE AMS5062J

SAE AMS5062J

Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (Stabilized: ..

$41.00 $81.00

SAE AMS7301J

SAE AMS7301J

Steel, Highly-Stressed Springs 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150) Case Hardened (Stabilized: A..

$41.00 $81.00

SAE AS4114A

SAE AS4114A

Production Test Plan for the Time Division Command/Response Multiplex Data Bus Bus Controllers (Stab..

$41.00 $81.00