• SAE AMS5938B

SAE AMS5938B

  • Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 10Cr - 12Ni - 2Mo - 1.45Al - 1.15Ti, Vacuum Induction Plus Vacuum Consumab
  • standard by SAE International, 01/12/2013
  • Category: SAE

$81.00 $41.00

This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of January 2013. By this action, this document will remain listed in the Numercial Section of the Index of Aerospace Material Specifications indicating that is has been "CANCELLED."

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.

These products have been used typically for heat-treated parts requiring a combination of high strength and high toughness up to 800 \mDF (427 \mDC) with good ductility and strength in the transverse direction, but usage is not limited to such applications.

Certain design, processing procedures, or environmental conditions may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J695_201106

SAE J695_201106

Turning Ability and Off Tracking - Motor Vehicles (Stabilized: Jun 2011)..

$41.00 $81.00

SAE J244_201106

SAE J244_201106

Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines (Stabilized: Jun 2011)..

$41.00 $81.00

SAE J586_201106

SAE J586_201106

Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width..

$41.00 $81.00

SAE J2956_201106

SAE J2956_201106

Occupant Restraint and Equipment Mounting Integrity – Side Impact System-Level Ambulance Patient C..

$41.00 $81.00