• SAE AMS6257E

SAE AMS6257E

  • Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Nor
  • standard by SAE International, 05/25/2011
  • Category: SAE

$81.00 $41.00

This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts under 3.5 inches (89 mm) in thickness requiring a through-hardening steel capable of developing a minimum hardness of 52 HRC, the parts being subject to very rigid magnetic particle inspection standards, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP1110 recommends practices to minimize such occurrences.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2343_200807

SAE J2343_200807

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles..

$41.00 $81.00

SAE GEIASTD0006

SAE GEIASTD0006

Requirements for Using Solder Dip to Replace the Rinish on Electronic Piece Parts..

$41.00 $81.00

SAE J2293/1_200807

SAE J2293/1_200807

Energy Transfer System for Electric Vehicles--Part 1: Functional Requirements and System Architectur..

$41.00 $81.00

SAE J738_200807

SAE J738_200807

Cutting Edge--Double Bevel Cross Sections..

$41.00 $81.00