• SAE AMS6277G

SAE AMS6277G

  • Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 – 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted
  • standard by SAE International, 06/23/2011
  • Category: SAE

$81.00 $41.00

This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for carburized parts requiring high minimum core hardness in sections 0.375 inch (9.52 mm) and under in nominal thickness, and which are subject to rigid magnetic particle standards, but usage is not limited to such applications. The core may or may not be machinable after hardening.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1703_201607

SAE J1703_201607

Motor Vehicle Brake Fluid..

$41.00 $81.00

SAE J1704_201607

SAE J1704_201607

Motor Vehicle Brake Fluid Based Upon Glycols, Glycol Ethers and the Corresponding Borates..

$41.00 $81.00

SAE J3079/2_201607

SAE J3079/2_201607

Low-preload Deflection Measurement for Brake Pads, Noise Shims, and Brake Pad Assemblies..

$41.00 $81.00

SAE AS39029/107C

SAE AS39029/107C

CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-DTL-38999 SERIES I, III, IV, MIL-DTL-..

$41.00 $81.00