• SAE AMS6280K

SAE AMS6280K

  • Steel Bars, Forgings, and Rings 0.50Cr 0.55Ni 0.20Mo (0.28-0.33C) (SAE 8630)
  • standard by SAE International, 10/01/2007
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

These products have been used typically for parts with sections 0.500 inch (12.70 mm) and under in thickness at the time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 35 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1993_201902

SAE J1993_201902

High-Carbon Cast-Steel Grit..

$41.00 $81.00

SAE J2494/3_201902

SAE J2494/3_201902

Performance Requirements for SAE J844 Non-Metallic Air Brake Tubing and Push to Connect Fitting Asse..

$41.00 $81.00

SAE J3005-1_201902

SAE J3005-1_201902

Permanently or Semi-Permanently Installed Diagnostic Communication Devices..

$41.00 $81.00

SAE AMS5914B

SAE AMS5914B

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0..

$41.00 $81.00