• SAE AMS6281J

SAE AMS6281J

  • Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)
  • standard by SAE International, 05/21/2015
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.

This product has been used typically for parts, with section thickness of 0.50 inch (12.7 mm) and under at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 35 HRC when properly hardened and tempered and for parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3198L

SAE AMS3198L

Sponge, Chloroprene (CR) Rubber Medium Stiffness (Stabilized: May 2014)..

$41.00 $81.00

SAE ARP5891

SAE ARP5891

Achieving Cleanliness Standards for Aircraft Hydraulic Systems During Manufacture..

$41.00 $81.00

SAE AS22520/20

SAE AS22520/20

CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (SHIELD CRIMP ..

$41.00 $81.00

SAE AS22520/21

SAE AS22520/21

CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (OUTER CONTACT..

$41.00 $81.00