• SAE AMS6300F

SAE AMS6300F

  • Steel Bars and Forgings, 0.25Mo (0.35 - 0.40C) (SAE 4037)
  • standard by SAE International, 05/17/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, and forging stock.

These products have been used typically for parts, 0.375 inch (9.52 mm) and under in nominal section-thickness at time of heat treatment, requiring a through hardening steel capable of developing hardness up to 40 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J393_201710

SAE J393_201710

Nomenclature - Wheels, Hubs, and Rims for Commercial Vehicles..

$41.00 $81.00

SAE AMS3218D

SAE AMS3218D

Elastomer: Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95..

$41.00 $81.00

SAE AMS2259F

SAE AMS2259F

Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels..

$41.00 $81.00

SAE AMS4350N

SAE AMS4350N

Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) As Extruded..

$41.00 $81.00