• SAE AMS6312H

SAE AMS6312H

  • Steel Bars, Forgings, and Tubing, 1.8Ni - 0.25Mo (038 - 0.43C) (SAE 4640)
  • standard by SAE International, 05/17/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts 0.250 inch (6.35 mm) and under in nominal section thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 50 HRC and also parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2417H

SAE AMS2417H

Plating, Zinc-Nickel Alloy..

$41.00 $81.00

SAE AMS2642D

SAE AMS2642D

Structural Examination of Titanium Alloys, Etch-Anodize Inspection Procedure..

$41.00 $81.00

SAE AMS5545F

SAE AMS5545F

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni ¿¿¿ 19Cr ¿¿¿ 11Co ¿¿¿ 9.8Mo..

$41.00 $81.00

SAE J1839_201010

SAE J1839_201010

Coarse Droplet Water/Fuel Separation Test Procedure..

$41.00 $81.00