• SAE AMS6317J

SAE AMS6317J

  • Steel Bars and Forgings 1.8Ni – 0.25Mo (0.38 – 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength
  • standard by SAE International, 11/05/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of heat treated bars and forgings.

These products have been used typically for parts with sections 1.0 inch (25 mm) and under in nominal thickness requiring a minimum tensile strength of 125 ksi (862 MPa), but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4268

SAE AMS4268

Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn; (2024-T81 Sheet, -T851 Plate) Solution Heat ..

$41.00 $81.00

SAE AMS4462

SAE AMS4462

Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T3 Sheet, -T351 Plate)..

$41.00 $81.00

SAE ARP6178

SAE ARP6178

Fraudulent/Counterfeit Electronic Parts; Tool for Risk Assessment of Distributors..

$41.00 $81.00

SAE AMS5398G

SAE AMS5398G

Steel, Corrosion-Resistant, Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22Cb (Nb) - 2.8Cu Solutio..

$41.00 $81.00