• SAE AMS6320N

SAE AMS6320N

  • Steel Bars, Forgings, and Rings 0.50Cr – 0.55Ni – 0.25Mo (0.33 – 0.38C) (8735)
  • standard by SAE International, 09/17/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

These products have been used typically for parts, 0.75 inch (19.0 mm) and under in nominal section thickness at the time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 40 HRC when properly hardened and tempered and for parts of greater thickness but requiring proportionally lower hardness but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J754_200909

SAE J754_200909

Lubricant Types--Construction and Industrial Machinery..

$41.00 $81.00

SAE AMS2261J

SAE AMS2261J

Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy, Bars, Rods, and Wire..

$41.00 $81.00

SAE J602_200910

SAE J602_200910

Headlamp Aiming Device for Mechanically Aimable Headlamp Units..

$41.00 $81.00

SAE AIR5719

SAE AIR5719

Teaching Points for an Awareness Class on "Critical Issues in Composite Maintenance and Repair"..

$41.00 $81.00