• SAE AMS6323L

SAE AMS6323L

  • Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.38 – 0.43C) (SAE 8740)
  • standard by SAE International, 09/27/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.

This tubing has been used typically for parts, 0.375 inch (9.52 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2631E

SAE AMS2631E

Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate..

$41.00 $81.00

SAE AS6449C

SAE AS6449C

Solid Film Lubricant..

$41.00 $81.00

SAE J852_201707

SAE J852_201707

Front Cornering Lamps for Use on Motor Vehicles..

$41.00 $81.00

SAE AMS4279B

SAE AMS4279B

Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4 Flat Sheet) Solution Heat Treated, High..

$41.00 $81.00