• SAE AMS6324H

SAE AMS6324H

  • Steel Bars, Forgings, and Tubing, 0.65Cr - 0.70Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740 Modified)
  • standard by SAE International, 06/16/2010
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts, 0.750 inch (19.05 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS10134B

SAE AMS10134B

ANGLE - UNEQUAL LEG EXTRUDED (Stabilized: Mar 2012)..

$41.00 $81.00

SAE AMS10135B

SAE AMS10135B

ANGLE - BULB SECTION EXTRUDED (Stabilized: Mar 2012)..

$41.00 $81.00

SAE AMS10136B

SAE AMS10136B

TEE - EXTRUDED (Stabilized: Mar 2012)..

$41.00 $81.00

SAE AMS10137B

SAE AMS10137B

CHANNEL - EXTRUDED (Stabilized: Mar 2012)..

$41.00 $81.00