• SAE AMS6348D

SAE AMS6348D

  • Steel, Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Normalized
  • standard by SAE International, 10/10/2013
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars. These bars have been used typically for parts, 0.50 inch (12.7 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 35 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1939/81_201106

SAE J1939/81_201106

Network Management..

$41.00 $81.00

SAE AS6119

SAE AS6119

FITTING ASSEMBLY, ELBOW, 90¿¿ AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI..

$41.00 $81.00

SAE AS6554

SAE AS6554

Cargo Stopper Devices..

$41.00 $81.00

SAE AS6103

SAE AS6103

FITTING, CROSS, STANDARD AND REDUCER, 37° SPHERICAL, FLARED..

$41.00 $81.00