• SAE AMS6349D

SAE AMS6349D

  • Steel Bars 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized
  • standard by SAE International, 02/26/2013
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars.

These bars have been used typically for parts 0.50 inch (12.7 mm) and under in section thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered and also for parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS6046B

SAE AS6046B

FITTING, CROSS, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE..

$41.00 $81.00

SAE AS6047C

SAE AS6047C

FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE..

$41.00 $81.00

SAE AS6048B

SAE AS6048B

FITTING, ELBOW, 90 DEGREE, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE..

$41.00 $81.00

SAE AS6049A

SAE AS6049A

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS, PRECISION TYPE..

$41.00 $81.00