• SAE AMS6349E

SAE AMS6349E

  • Steel Bars 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized
  • standard by SAE International, 12/07/2017
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars.

These bars have been used typically for parts 0.50 inch (12.7 mm) and under in section thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered and also for parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6551

SAE AMS6551

Steel Bars, Forgings and Tubing 1.75 Cr – 4.0 Ni – 0.5 Mo – (0.35–0.40 C) Premium Aircraft Q..

$41.00 $81.00

SAE AMS2431/7B

SAE AMS2431/7B

Peening Media Ceramic Shot..

$41.00 $81.00

SAE AMS2678A

SAE AMS2678A

Furnace Brazing of Parts in a Vacuum Atmosphere..

$41.00 $81.00

SAE AMS3915

SAE AMS3915

Advanced Composites Prepreg – Nominal 250 °F Cure –Glass Fiber and Epoxy Resin, 7781 Weave Fabr..

$41.00 $81.00