• SAE AMS6350L

SAE AMS6350L

  • Steel Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28-0.33C) (SAE 4130)
  • standard by SAE International, 05/17/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.

These products have been used typically for use where welding and moderate tensile properties are required, but usage is not limited to such applications. Sheet and strip are extensively used where minimum tensile strength of 180 ksi (1241 MPa) is required in sections up to 0.125 inch (3.18 mm) in nominal thickness and proportionately lower strength is required in heavier thicknesses.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5788F

SAE AMS5788F

Cobalt Alloy, Corrosion and Heat-Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C..

$41.00 $81.00

SAE AMS5702D

SAE AMS5702D

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (..

$41.00 $81.00

SAE AMS5714D

SAE AMS5714D

Alloy Bars, Forgings, and Rings, Corrosion and Heat-Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe..

$41.00 $81.00

SAE AMS5672C

SAE AMS5672C

Steel Wire, Corrosion Resistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu Precipitation Hardena..

$41.00 $81.00